Is your Heater Up for the Holidays?

Is your Heater Up for the Holidays?

A properly working heater is the key to a comfortable home this holiday season. Peak functionality also keeps your heating bills down, an important consideration when other costs climb around the holidays. To ensure you and your guests stay comfy and cozy while the wind whistles outside, perform the items on this checklist prior to the holidays.

Change the Air Filter

This is the first and one of the most important tasks to prepare your heater for winter. A dirty air filter blocks airflow, reduces efficiency and overworks the equipment. On the other hand, replacing the filter regularly promotes cleaner indoor air, lower your energy bills and helps your equipment last longer.

Plan to change the filter at the start of the heating season. Then, check it once a month during the winter and change it when it begins to appear dirty, waiting no more than three months between changes. Make sure you choose replacement filters of the proper size and efficiency for the best results.

If you run an electronic air cleaner in the winter, be sure to clean the unit’s air filter according to manufacturer directions.

Check for Gas Leaks

If your heater runs on natural gas, a leak could develop and create risk for you and your family. Before relying too much on your heater this season, inspect the furnace for worn or damaged connections. Be aware of natural gas odors. If you discover a problem – either with your eyes or your nose – call a professional for further investigation before you turn on the heater.

Check the Air Vents

Supply registers deliver heated air while return registers send cooled air back to the furnace for reheating. If these vents are blocked, heating efficiency declines and you tend to experience hot and cold pockets throughout your home. This can create great discomfort during a holiday get-together.

To promote better airflow and a more even temperature, walk around your home and check that all air vents are unobstructed. Move area rugs, reposition furniture and tie curtains back if necessary to allow for ample airflow.

Test for Proper Operation

Switch the dial on your thermostat to “Heat” and turn the temperature up a degree or two to trigger the furnace. Listen for any strange sounds coming from the heater or the ductwork. If you hear anything odd, it may be wise to contact a heating technician for a repair.

Place your hand over various registers in your home, including those located close to the furnace and those farther away. Make sure the air is plenty hot and exiting the registers with ample force.

Schedule an Annual Tune-Up

A complete furnace inspection includes other tasks that only a qualified technician should perform. That’s why the final item on your checklist should be to schedule preventative maintenance from Aire Serv®. We have the knowledge and experience needed to check fuel connections, test the gas pressure, clean the burners, inspect the heat changer, test system controls and more.

If you experience trouble with any of the items on this checklist, please contact Aire Serv to speak with a knowledgeable technician. We’re proud to be your Comfort Company since 1992.

Categories: